(Pre-)mixing
We provide you with flexible solutions for mixing and dosing plastics that make your company more economical.
Our premixers mix plastics such as granulate, regrind or free-flowing powder with masterbatch or additives.
Homogeneous mixing is the basis for further processing - in injection molding, extrusion or blow molding.
Dosing and coloring
With our dosing solutions, you can achieve maximum accuracy when dosing masterbatch or additives into a main material.
We offer volumetric and gravimetric dosing solutions for dosing additives into a plastic material that is then processed in the injection molding machine or extruder.
This allows you to achieve precisely consistent color shades when coloring.
Technical specification:
| Throughput | Mixer | Type GX |
|---|---|---|
| with powder* | max. | 40 kg/h |
| with masterbatch | max. | 60 kg/h |
*only free-flowing powder
Premixers for extruders and blow molding systems
with machine throughputs of up to 60 kg/h.
The pre-mixer type Gx is optimized for use in extrusion and blow moulding. Material is dosed into the mixer in batches and mixed homogeneously before processing.
The premixer has four receptacles for dosing stations or slides, which are used to dose in batches. If the fill level falls below a certain level, all stations dose a precisely adjustable quantity into the mixer.
This means that the color tone always remains constant, even with uneven machine output.
