Individually assembled for YOU:
Peripherals for Mixing, Dosing, Conveying and Drying plastic materials
The Koch-Technik Modular System
modular and flexible
The KOCH modular system enables a customized assembly of our units and device components:
- All devices and device components are standardized and fit together in a meaningful combination
- Modular design of all device components (hoods, main body, intermediate hopper ...)
- Simple and tool-free handling
- Individual device components can be hinged, swivelled or shifted, also directly on the processing machine
- Existing devices can be combined with new modules
The most important components of the KOCH modular system
Conveyors and material separators (suction conveying)
Conveyors (110V or 230V and 400V)
You can automate your production with our conveyors, especially the material transport. Each device has its own vacuum generator. So, you can quickly realize even independent stand-alone solutions.
Since the compact conveyors are made of high-quality aluminium ingot mould castings, you can swivel the units on the attached material hoppers and open up the conveying hoods, even directly on a processing machine.
The same applies to a portion of our single conveyors. For clean, dust-free material transport, we offer devices with polyester fleece filters and rotary blade cleaning systems.
Hopper loaderfor central conveying systems
With our hopper loaders, we can adapt your central material supply system to the correct flow rate for each individual place of use.
All our hopper loaders are robust and long-lasting. As with the conveyors, you can swivel a few of devices directly on top the processing machine and open up the hoods – simply and without tools.
In addition, all our hopper loaders are available in a TM design for conveying two different materials.
Intermediate hoppers and volumetric dosing stations and units
Intermediate hopper
Our intermediate hoppers are used for the short-term storage of material on the processing machine. They are installed directly above the material input or onto a flange or mixer. A suction conveyor sucks in material and fills the hopper. The size of the hopper determines how much material is available until new material is sucked in again.
Each hopper has two sight-glasses for monitoring.
Volumetric dosing stations and units
Our volumetric dosing stations and systems add the masterbatch and additive substances to a processing material.
So that you can dose a wide variety of materials, we offer you volumetric dosing solutions in all types and sizes to cover the entire range of plastics processing.
Pre-mixers, flanges and gravimetric dosing systems
You can install our pre-mixers, flanges and gravimetric dosing systems directly onto the material input of your processing machine.
The AZ flanges are used for the volumetric direct colouring. The installed KEM dosing units add the masterbatch and additive substances into the free-flowing processing material.
Pre-mixers and gravimetric dosing systems are designed to be attached to dosing stations and slide valves for dosing additives.
Our pre-mixers for injection moulding machines and extruders and GRAVIKO type gravimetric dosing systems mix various dosed materials homogenously before the processing.