Material conveyor separator [V]

Material conveyor separator [V]

We plan, manufacture and install your central material supply system - designed entirely according to your wishes and adapted to your plastics processing.

Advantages

  • Completely tailored to your plastics processing
  • Optimum hall utilization
  • Central material management without the risk of confusion
  • Cost-saving, with reduced personnel deployment
  • Clean production, as there are no residues on the machines
  • Very short amortization period
  • Easy integration of granulate dryers and central mixers
  • Central material routing system possible
  • Continuous operation without downtimes
  • Modularity makes the system expandable and future-proof
Material separator A8 with intermediate hopper Z5 in a central conveyor system
Conveyor separator TMA30 and TMA20 with intermediate hopper Z12

Material separator (conveyor separator) for your material supply

Conveyor separator TMA30 and TMA20 with intermediate hopper Z12

Type A2 is a separator for the smallest material throughputs.
Together with an intermediate hopper Z1, you can convey 5 kg of material per hour. Especially when processing dried but hygroscopic material, there is a clear advantage here: a short dwell time in the hopper prevents loss of quality due to moisture.

Material separator A20

You can easily use the A20 / A30 conveyor separators to transport 300 kg/h or 400 kg/h of granulate. The robust separators are ideal if you need to transport large quantities of material.

Material separator type A8

The type A8 is a material separator for regrind and granular pellets with which you can convey up to 150 kg/h. This conveying separator is reliable, maintenance-free and durable.

Conveyor separator type A 50 / A 70 BELIKO

The BELIKO A50 to A150 separators are designed for throughputs of 500 kg/h to 2500 kg/h of reclaim and granulate.. With these durable conveying separators, you can transport very large quantities of material over long conveying distances.

Conveyor separator TMA8

TM: Conveying two different materials, e.g. virgin material and regrind, alternately

TM conveyor separators have two material inlets and a mixing diverter. This gives you the option of reprocessing regrind directly and not allowing the proportion of regrind fed in to become too high. An integrated control system allows you to set the conveying time, changeover and percentage for both material components.

Technical specification

Type Content in liters Throughput in kg/h Material types Cleaning
A2 1,3 5 1 Sieve filter
TMA2 1,3 5 2 Sieve filter
A8 12 150 1 Sieve filter
A8D 12 150 1 Rotary sash*
TMA8 12 150 2 Sieve filter
TMA8D 12 150 2 Rotary sash*
A20 20 300 1 Sieve filter
A20D 20 300 1 Rotary sash*
TMA20 20 300 2 Sieve filter
TMA20D 20 300 2 Rotary sash*
A30 30 400 1 Sieve filter
A30D 30 400 1 Rotary sash*
TMA30 30 400 2 Sieve filter
TMA30D 30 400 2 Rotary sash*
A50 50 600 1 Sieve filter
A50D 50 600 1 Rotary sash*
A70 70 900 1 Sieve filter
A70D 70 900 1 Rotary sash*
A100 100 1300 1 Sieve filter
A100D 100 1300 1 Rotary sash*
A150 150 1800 1 Sieve filter
A150D 150 1800 1 Rotary sash*

Rotary blade* = Rotary blade cleaning for cleaning the polyester fleece filter, which separates the material from the conveying air.

GLASKO - Conveyor separators made of special glass

The GLASKO type is a GBM-protected series for conveying glass fiber reinforced materials. The conveying container is made entirely of 6 mm thick special glass, right up to the discharge flap.

When sucking in extremely hard material, the service life is increased a hundredfold compared to conventional conveyor separators!

Advantages of the GLASKO:

  • Special conveyor for all glass fiber reinforced materials
  • Conveying container made of 6 mm thick special glass
  • Very high wear resistance and stability
  • Seamless integration into conveyor systems possible
  • Suitable for the KOCH modular system
  • tool-free cleaning, swivels on our cast aluminum material hoppers
  • Volume from 10 liters to 30 liters

Technical specification

Type Content in liters Throughput in kg/h Material types Cleaning
A8G 8 100 1 Sieve filter
A8DG 8 100 1 Rotary sash*
A20G 20 200 1 Sieve filter
A20DG 20 200 1 Rotary sash*
A30G 30 300 1 Sieve filter
A30DG 30 300 1 Rotary sash*

Rotary vane* = Rotary vane cleaning for cleaning the polyester fleece filter through which the material is separated from the conveying air.

For conveying two materials (TM), the GLASKO can be equipped with a control unit and an external mixing diverter made of special glass.

Scroll up